Welding
camera

MIG/MAG, TIG, and Plasma. Arc-rated optics handle all common processes from low-current TIG at 80A to high-current MIG spray transfer at 350A+. The camera includes the Neuron Mini processing unit which merges two exposures into one image in real-time.

Neuron Mini captures two frames at different exposures and merges them in real-time. You see both the bright arc and the dark surroundings simultaneously — no detail lost in either. The processing runs in software, so it improves with updates.

Yes. Rocket Retina is power-source-agnostic. It works with Fronius, Lincoln, Miller, ESAB, Kemppi, OTC Daihen, or any other brand. No lock-in to any specific equipment manufacturer.

Yes. Every recording includes full WPS-style parameters (process, material, current, voltage, wire, gas, travel speed). This makes each recording a traceable quality record supporting ISO 3834, EN 1090, and EN 15085 documentation requirements.

Rocket Retina camera + Neuron Mini processing unit + enclosure (standard or mirrored) + protective window kit + installation support (Poland). The Neuron Mini is required — it processes the video feed and merges the two exposures into one image.

Up to 100m with a CAT7 Ethernet cable. Single cable carries both video and power (PoE) — no separate power supply needed at the camera.

Tool-free replacement. Slide out the old window, slide in the new one. Spare windows are available as consumables — standard maintenance for any welding environment.

The camera takes two exposures per frame — a short one that captures the pool border without blowout, and a long one that captures the surroundings. Both are merged in real-time, so you see the full picture in one image. The processing runs in software, so it improves with updates.

Absolutely. We redesigned how a welding camera is built — no special cooling, no pumps, proper enclosure included out of the box. Plus you get all the digital capabilities for free: recording, viewing from other devices on the network, and lossless transmission. The entire signal path — camera to Neuron to monitor — is fully digital. No analog degradation, no signal loss.

Yes — Rocket Retina is built for continuous exposure to a MIG/MAG arc, not just for a short demo. IP65 on both Standard and Mirrored enclosures, a compact 35 × 35 × 122 mm body that fits torch-mounted, fixture-mounted, or robot-end-effector setups, and an interchangeable protective window that takes spatter hits as a consumable (tool-free swap). On cooling: traditional welding cameras try to capture the full arc-to-surroundings dynamic range from a single frame. To do that they rely on older, specialised silicon sensors with very high dynamic range — those sensors run hot and have to be liquid-cooled to stay within spec near the arc. Rocket Retina takes a different path: an industry-grade CMOS sensor captures two sequential exposures, and modified optics, integrated illumination, and software running on the Neuron Mini merge them into one HDR image. The heavy lifting is done off-camera, so the camera body stays thermally lean — no fans, no pumps, no cooling liquids. The practical payoff: fewer failure modes (no pump to fail, no coolant to leak or go stagnant), nothing hydraulic to route into the cell, and maintenance reduces to swapping a protective window.