RocketWelder RocketWelder
Total one-time $35,608 netRocket Cortex Cloud  $960 / month netindicative
USDEUR
← Back

Your set

Everything you picked, with an indicative net price. Send it to us and we turn it into a formal offer.

Indicative price

net, excl. VAT — not a binding offer

Vision system $10,396
Rocket Retina camera $5,099
Monitor 21.5″ $999
Display HMI Kiosk $1,899
Rocket Neuron AI computer $2,399
Cobot $12,099
Welding machine $12,014
Installation and commissioning $1,099
Total one-time $35,608 net

Installation and commissioning in Poland. Operator training included. If real-time correction needs AI fine-tuning to your process, it is quoted separately — once we understand the process.

Subscription

Rocket Cortex Cloud $960 / month net
12-month minimum terminvoiced quarterly — $2,880 in advance Remove the addon

What is not included

  • The welding torch — no Megmeet set, MIG or TIG, ships with one
  • Positioner and fixturing
  • Fume extraction and its interlock to the robot controller
  • Arc-flash screening and cell enclosure
  • Shielding gas, wire and filler
  • Consumables

Email my configuration and offer

We will send you a link to this configuration together with the offer. Tell us where to send it.

We send the offer link to this address.
Only if you would rather we called.

Installation and commissioning

Mounting at the station, wiring, commissioning and operator training — on your shop floor.

What the site has to provide
  • A site in Poland, reachable by our team during normal working hours.
  • 3 x 400 V brought to the station, protected to suit the power source.
  • The robot or cobot mounted, working, and with current documentation.
  • The welding power source at the station, working and connected.
  • Extraction and arc screening consistent with the station's risk assessment.
  • Network or an access point at the control cabinet.
Does the site meet these conditions?
Yes, it doesNot all of themI am not sure

The figure assumes the conditions above are met. We confirm them with a site survey before installation, and it is binding only after that.

Link to this configuration

https://www.rocketwelder.com/en/configurator?step=review&cam=direct&cobot=fr10&machine=mig&alu=0&pulse=1&frame=400&tig=400&cobot_new=0&machine_new=0&currency=USD&boost=on&site=met&mon=monitor_22&ai=on&lic=cloud

This page's address carries your choices. Copy it, send it on, or come back to it later.