RocketWelder RocketWelder
Total one-time 31,013 EUR netRocket Cortex Cloud  840 EUR / month netindicative — not a binding offer
USDEUR
← Back

Your set

Everything you picked, with an indicative net price. Send it to us and we turn it into a formal offer.

Indicative price

net, excl. VAT — not a binding offer

Vision system
Direct — short 8,957 EUR
Rocket Retina camera 4,360 EUR
Monitor 21.5″ 899 EUR
Display HMI Kiosk 1,599 EUR
Rocket Neuron AI computer 2,099 EUR
Cobot
Fairino FR10 10,390 EUR
10 kg · 1400 mm · ±175°
Welding machine
Megmeet Artsen Plus 400 PR 10,317 EUR
MIG/MAG · 400 A / 34 V 100% @ 40 °C
Robotic welding torch, liquid-cooled, 4 m
narrow nozzle (wire 0.8 / 1.0 / 1.2 mm)added automatically 350 EUR
neck angle 40°

The Megmeet set ships without a torch — we added one, because the station cannot weld without it. You can remove it.

Remove from the set
Installation and commissioning 999 EUR
Total one-time 31,013 EUR net

Installation and commissioning in Poland, with one-day operator training. If real-time correction needs the AI model fine-tuned to your process, we quote it separately — once we understand the process.

Subscription

Rocket Cortex Cloud 840 EUR / month net
12-month minimum terminvoiced quarterly — 2,520 EUR in advance Remove the addon

What is not included

  • Station design and CE safety — determined with the client.

Email my configuration

We will send you a link to this configuration together with the offer. Tell us where to send it.

We send the offer link to this address.
Only if you would rather we called.

Installation and commissioning

Mounting at the station, wiring, commissioning and operator training — on your shop floor.

What has to be ready on your side
  • Internet access over Ethernet — a network socket at the station.
  • Power: 3 × 400 V for the welding machine, 230 V for the computer and the monitor.
  • A stable base for the arm: a table or frame bolted to the floor.
  • Fume extraction and arc screening at the station.
  • Shielding gas and wire, connected.
  • Parts for the first welds and the fixture that holds them.
  • An operator for the one-day training, and hall access for our crew.
Will all of this be ready by installation day?
Yes, it willNot all of itI am not sure

The figure assumes we find all of this at the station when we arrive. We go through the list with you at a site survey before installation, and it is binding only after that.

Link to this configuration

https://www.rocketwelder.com/en/configurator?step=review&cam=direct&cobot=fr10&machine=mig&alu=0&pulse=1&frame=400&series=plus&tig=400&cobot_new=0&machine_new=0&currency=EUR&boost=on&site=met&mon=monitor_22&ai=on&lic=cloud&torch=on&torch_var=1.0&torch_angle=40&seg3=1&seg4=0&rot=100&axis=none

This page's address carries your choices. Copy it, send it on, or come back to it later.