Total
one-time $35,608 netRocket Cortex Cloud
$960 / month netindicative
indicative — not a binding offer
Choose your welding machine
Megmeet, with the robot interface card that lets the platform set and read arc parameters — not just watch them. Tell us what you weld and we resolve the model; you can override it at any point.
MIG / MAG
wire · fillets · plate · production rate
TIG
thin wall · root runs · seams that get looked at
I have my own machine
Fronius
$12,014 net
Megmeet Artsen Plus 400 PR
Delivery time: 10 daysThe robotic MIG/MAG set. The two questions below settle the capability letter — the one choice here that cannot be corrected later without buying a new power source.
1 · What materials do you weld?
Aluminium is a different power source, not an option you add later. If there is any chance of it at all, choose it now.
2 · Current
Specification
- Max. welding current
- 400 A
- No-load voltage
- 85 V
- Power factor
- 0.94
- Duty cycle
?
how much it actually welds in a shift before it has to stop and cool - 400 A / 34 V 100% @ 40 °C
- Connected load
?
the fastest "no" in the whole configuration — check the spare capacity at that bay before anything else - 22.3 kVA
- Gross weight
- 57.5 kg
- Dimensions
- 620 × 300 × 480 mm
- Ingress protection
?
what it survives at the arc — spatter and grinding dust - IP23 S
- Welding process
- MIG/MAG
- Current at 100 % duty
- 400 A
- Wire diameter
- 0.8 mm, 0.9 mm, 1.0 mm, 1.2 mm, 1.6 mm
- Materials
- CS, SUS
- Rated output current
?
the bottom of the range decides thin sheet as much as the top decides plate - 30 – 400 A